![]() All of the standoffs and screws must be installed. Caution: To prevent damage to the motherboard it must only contact the standoffs and screws. It works best to leave the screws loose until all of them have been started and the board is aligned with the bezel. Lower the motherboard into the case and align with the I/O bezel.įigure 15 shows the motherboard installed in the case. Check the screw hole locations on the motherboard for exact placement. ![]() The standoffs screw into the motherboard mounting holes shown in figure 14. Install the I/O bezel plate into the opening in the back of the case (figure 14). Screws and standoffs should be included with the case, but it is a good idea to order these items just in case they aren't included.įollow these steps to install the motherboard in the case: The screws install into the standoffs as shown in figure 13. Standoffs are installed in the case screw holes to create a riser that separates the case and motherboard. Figure 12 shows the contents of the motherboard box. It should be included with the motherboard. PC cooling is about bringing cool air into the case, removing the heat generated by. I/O Bezel is a trim panel installed in the back of the case that surrounds the interface ports on the motherboard. The inside of a case showing off the cooling airflow. To install the motherboard we need parts that should have been included with your purchased components: Kits are supposed to contain compatible parts, but mistakes can happen. Caution: Double check the manufacturer’s specifications on all items before you purchase them. There is an obvious financial advantage to buying parts bundled together, but less obvious is the benefit you will realize from the amount of time you save trying to research parts compatibility. The DVD drive and cables were purchased from for less than $30 before shipping. In this instance, the case, motherboard, cpu, hard drive, and memory were bought together from as a barebones kit for around $200. Most, if not all of these parts can be bought together in what is known as a “barebones kit”. ![]() Flowers (necessary if you are invading the space of your significant other) Assortment of case and drive screws (Not Pictured)ġ2. Optical Drive (DVD RW and SATA capable)ġ1. The parts we will use in this project are labeled in figure 1:ģ. First you will need to buy the parts necessary to build the computer. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |